TIANTAI ZHENXING FILTECH FACTORY

High quality product, professional service, being the core supplier in laser industry!

Polywound String Wound Filter Cartridges

Polywound String Wound Filter Cartridges

Send Inquiry
Product Details

Filter Cartridge


Carbon

Carbon-Clean Series Filter Cartridges

A Full Range of High Performance Carbon Cartridges Providing Separation and Purification

CB-B Series

·Carbon Block Design is a Cost Effective Alternative to Granular Activated Carbon Cartridges

·FDA Listed Materials Make this a Suitable Choice for Potable Water and Food Service Applications

·Rigid Center Core Enhances the Durability of the Filter Cartridge in Demanding Applications

·High Porosity Design Maximizes Utilization of Carbon to Prevent Premature Plugging

·Polypropylene Inner and Outer Layer Filtration Media Provide Efficient Pre-Filtration and Post-Treatment

·Manufactured under a Certified ISO 9001 Quality System

CB-WS Series

·All Materials are FDA Listed for Food and Beverage Contact

·Carbon Impregnated Cellulose Media Provides Lower Pressure Drops than Conventional Carbon Block Filter Technology

·Carbon Technology Improves Potable Water Quality by Removing Taste, Odor and Color

·Polypropylene Pre-filtration Provides a Wide Range of Options to Address Chemical Compatibility Concerns

·304 Stainless Steel Center Core Option for High Temperature and High Viscosity Applications

·Manufactured under a Certified ISO 9001 Quality System

CB-RC Series

·All Materials are FDA Listed for Food and Beverage Contact

·Excellent Polishing Filter for Process or Closed Loop Streams.

·High Quality Carbon Sheet Increases the Absorption Efficiency and Capacity of the Filter Cartridge. Removes Chlorine and Eliminates Trace Orders

·Rigid Polypropylene Center Core Enhances the Mechanical Strength of the Filter Cartridge

·Elastomeric End Caps Enhance Cartridge’s Performance by Minimizing the Chance of Bypass

·Manufactured under a Certified ISO 9001 Quality System

Product Specifications

Materials of Construction:     

·Filter Media:CB-B Series Bonded Porous Activated Carbon with Polyethylene Binders

CB-WS Series Carbon Impregnated Fibers Protected by Upstream and Downstream Polypropylene String Wound Fibers

CB-RC Series Powder Activated Carbon Impregnated Polyester

·Outer Netting: CB-B Series Polyethylene

CB-WS Series None

CB-RC Series Polyethylene
·End Cap:CB-B Series Polypropylene

CB-WS Series None

CB-RC Series Polypropylene
·Inner / Outer Wrap: CB-B Series Polypropylene

CB-WS Series Polypropylene String Wound Fibers 

CB-RC Series None

Dimensions (Nominal)

·Lengths: 10” to 30” (254mm to 762mm)

·Outside Diameter: 2.56” (65mm)

·Removal Rating: CB-B Series 5µm

CB-WS Series  5µm

 CB-RC Series 5µm

Operating Conditions:

·Maximum Operating Temperature:CB-B Series 40°F to 140°F (5°Cto 60°C)

CB-WS Series 40°F to 140oF (5°Cto 60°C)

CB-RC Series40°F to 140°F (5oCto 60°C)

FDA Listed Materials

All Materials Meet U.S. Food and Drug Administered Requirements for Food and Beverage Contact (CFR 177.1500)

Applications

 

Organics

Taste,Odor,
     Color

Chlorine

Particle Removal

Drinking Water

OK

OK

OK

OK

Bottle Washing Water

OK

OK

OK

OK

Rinse Water

OK

OK

OK

OK

RO Pre-filtration

OK

OK

OK

OK

PCB Process

OK

OK

OK

OK

Printing Process

OK

OK

OK

OK

Gases

OK

OK

OK

OK

Air, Instrument

OK

OK

OK

OK

Air, Breathable

OK

OK

OK

OK

Notes:

1.Drinking Water of Unknown Quality may Require Proper Disinfection or Pre-treatment in Addition to Carbon Filtration.

2.CB-B and CB-WS Series Contain a Very Small Amount of Carbon Fines. After Installation, Flush the Cartridge for a Minimum of 5 Minutes to Remove All Traces of Carbon Prior to Using Them in the Process. Flush the Tap Water for at Least 20 Seconds Prior Using for Drinking Water or Cooking Purposes.

3.Steps Should be Taken to Prevent the Filter Cartridge from Freezing. This may Affect Performance.

Ordering Information

CB-

B

10

P

Product Name

Filter Type

Cartridge Length

CoreMaterial

Carbon- Clean

B=Carbon Block
WS=Carbon Sheet with
PP String Wound    
RC=Carbon Sheet

10",20",30"

P=PP core

Melt-Blown

POLY-ADCT Series Filter Cartridges

Advanced Polypropylene Melt Blown Filter CartridgeswithPolypropylene Core for Demanding Applications

·Retention Ratings from 0.5umto 75um

·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

·Proprietary Center Core for Greater Mechanical Strength

·Easy and Safe Cartridge Incineration or Disposal -100% Polypropylene Construction

·Free of Surfactants, Binders, Anti-static Agents and Adhesives

·All Materials are FDA Listed for Food and Beverage Contact

·Double Open End and Single Open End Cartridge Configurations Available

Product Specifications

Materials of Construction:

·Filter Media: Polypropylene

·Center Core: Polypropylene  

·End Caps: Polypropylene

·Extended Core: Polypropylene

·Gaskets/O-Rings: Silicone, Buna-N, Viton , EPDM

Dimensions:

·Outside Diameter: 2.5”(63mm)

·Inside Diameter: 1.1” (28mm)

·Lengths: 4” to 50” (101.6mm to 1270mm)

Performance Specifications

·Retention Ratings: 0.5, 1,3,5,10,20,30,50,75µm

Operating Conditions:

·MaximumOperatingTemperature: 185°F(85°C)

·RecommendedChange Out Differential Pressure: 35psid(2.4 bar)

FDA Listed Materials

All Materials Meet U.S. Food and Drug Administered Requirements for Food and Beverage Contact (CFR 177.1500)

Toxicity

All Cartridge Components Meet USP-XXIII, Class V Criteria

Purity

All Filter Cartridges are Free of Surfactants, Anti-static agents, Binders and Adhesives

Ordering Information

PAT

5-

20

P-

3

E

Product Name

Retention Rating

Cartridge Length

Core Material

End
     Configurations

O-ring Materials

POLY- 

ADCT

0.5, 1, 3, 5, 10, 20, 30, 50, 75µm

4", 9.87", 10", 19.5", 20", 29.5", 30", 39.5", 40", 50"

P = PP

DOE = No Symbol  
3 = SOE with 222 O-rings, Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End
PE = PE Gaskets

N = Buna-N
E = EPDM
V = Viton
S = Silicone

Puris-Fine BB Series Filter Cartridges

Large Diameter Polypropylene Melt Blown Cartridges

·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

·Easy and Safe Cartridge Incineration or Disposal

·100% Polypropylene Construction

·Free of Surfactants, Anti-static Agents, Binders and Adhesives

·All Material Meet FDA Requirements for Food and Beverage Contact

·Special Outside Diameter of 4.3” (110mm)

·Can Retrofit Most Existing Cartridges Used in Large Diameter Housings

Product Specifications

Materials of Construction

·Filter Media: Polypropylene

Dimensions:

·Outside Diameter: 4.3” (110mm)

·Inside Diameter: 1.1” (28mm)

·Lengths: 10” to 20” (254mm to 508mm)

Performance Specifications

·Retention Ratings:1, 5,10, 20, 50µm

Maximum OperatingPressure:

·50 psid (3.45 bar) @ ambient

·25 psid (1.72 bar) @ 140°F (60°C)

Recommended Change Out Differential Pressure:

·35 psid (2.4 bar)

FDA Listed Materials:

Manufactured From Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations.

Purity:

All Puris-FineBBFilter Cartridgesare Free of Surfactants, Anti-static Agents, Binders and Adhesives.

Ordering Information

PRS

5-

10-

BB

Product Name

Retention Rating

Cartridge Length

End Configurations

Puris-Fine BB

1,5,10,20,50µm

10”,20”

BB=For Big Blue SizeHousing

Puris-Fine Series Filter Cartridges

High Purity Polypropylene MeltBlown Cartridge can be Used in aWide Range ofApplications

·Graded Pore Structure Enhances Dirt Holding Capacity and Filtration Efficiency

·Easy and Safe Cartridge Incineration orDisposal

·100% Polypropylene Construction

·Cartridges are Free of Surfactants, Binders and Adhesives

·Cartridges Materials are FDA Listed for Food and Beverage Contact

·Materials are NSF Certified

Product Specifications

Materials of Construction

·Filter Media: MeltBlown Polypropylene 

·End Caps: Polypropylene

·Extended Core: Polypropylene

·Gaskets/O-Rings: Silicone, Buna-N, Viton, EPDM

Dimensions:

·Outside Diameter: 2.5” (63mm)

·Inside Diameter: 1.1” (28mm)

·Lengths: 4”to 50” (101.6mmto 1270mm)

Performance Specifications

·Retention Ratings: 0.5,1,3,5,10,20,30,50,75µm

Maximum Differential Pressure:

·50 psid (3.45 bar) @ ambient

·25 psid (1.72 bar) @ 140°F (60°C)

Recommended Change Out Differential Pressure:

·35 psid (2.4 bar)

FDA Listed Materials:

Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations.

Purity:

All Puris-Fine Filter Cartridgesare Free of Surfactants, Anti-static Agents, Binders and Adhesives.

Ordering Information 

PRS

5-

20-

3

E

Product Name

Retention Rating

Cartridge Length

End Configurations

O-ring Materials

Puris-
Fine

0.5,1,3,5,
10,20,30,
50,75µm

4",9.87",10",19.5",20",
29.5",30",39.5",40",50"

DOE = No Symbol  
3 = SOE with 222 O-rings,
Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End
PE = PE Gaskets

N = Buna-N
E = EPDM
V = Viton
S = Silicone

Superior-Fine Series Filter Cartridges

100% Polypropylene MeltBlown Cartridges with a Fixed Pore Structure That Deliver High DirtHolding Capacity and Consistent Performance

·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

·ProprietaryInter-ZoneBonding Process Provides a Rigid Filtration Structure That does not Compress as the Differential Pressure Increases

·High Purity Material Allows Optimization of the Filtration Media For Longer Life and Higher Efficiencies

·Easy and Safe Cartridge Disposal via Incineration, Shredding or Compaction

·100% Polypropylene Construction – Non-Fiber Releasing Matrix

·Cartridges are Free of Surfactants, Binders, Anti-static Agents and Adhesives

·Materials are FDA Listed for Food and Beverage Contact

·Materials are NSF Certified

Product Specifications

Materials of Construction:

·Filter Media: MeltBlown Polypropylene 

·End Caps: Polypropylene

·Extended Core: Polypropylene

·Gaskets/O-Rings: Silicone, Buna-N, Viton, EPDM

Dimensions:

·Outside Diameter: 2.5”(63mm)

·Inside Diameter: 1.1” (28mm)

·Lengths: 4”to 50” (101.6mmto 1270mm)

Performance Specifications

·Retention Rating: 1,3,5,10,20,30,50,75,100µm

Operating Conditions:

·MaximumOperatingTemperature: 158°F(70°C)

·RecommendedChange Out Differential Pressure: 35psid(2.4 bar)

FDA Listed Materials

All Materials Meet U.S. Food and Drug AdministeredRequirements for Food and Beverage Contact (CFR 177.1500)

Toxicity

All Cartridge Components Meet USP-XXIII, Class V Criteria

Purity

All Filter Cartridges are Free of Surfactants, Anti-static Agents, Binders and Adhesives

Ordering Information

PCB

5-

20

P-

3

E

Product Name

Retention Rating

Cartridge Length

Core Material

End Configurations

O-ring Materials

Superior-Fine

1, 3, 5, 10, 20, 30, 50, 75, 100µm

4", 9.87", 10", 19.5", 20", 29.5", 30", 39.5", 40", 50"

NONE

DOE = No Symbol  
3 = SOE with 222 O-rings, Flat Closed End
8 = SOE with 222 O-rings , Fin End
7 = SOE with 226 O-rings,
Fin End
PE = PE Gaskets

N = Buna-N
E = EPDM
V = Viton
S = Silicone

Membrane

Micro-Flow G Series Filter Cartridges

Filtrafine POLY-ADCT Series FilterCartridges

Advanced Polypropylene Melt Blown Filter CartridgeswithPolypropylene Core for Demanding Applications

·Retention Ratings from 0.5umto 75um

·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

·ProprietaryCenterCore for Greater Mechanical Strength

·Easy and Safe Cartridge Incineration or Disposal -100% Polypropylene Construction

·Free of Surfactants, Binders, Anti-static Agents and Adhesives

·All Materials are FDA Listed for Food and Beverage Contact

·Double Open End and Single Open End Cartridge Configurations Available

Product Specifications

Materials of Construction:

·Filter Media: Polypropylene

·Center Core: Polypropylene  

·End Caps: Polypropylene

·Extended Core: Polypropylene

·Gaskets/O-Rings: Silicone, Buna-N, Viton , EPDM

Dimensions:

·Outside Diameter: 2.5”(63mm)

·Inside Diameter: 1.1” (28mm)

·Lengths: 4”to 50” (101.6mmto 1270mm)

Performance Specifications

·Retention Ratings: 0.5, 1,3,5,10,20,30,50,75µm

Operating Conditions:

·MaximumOperatingTemperature: 185°F(85°C)

·RecommendedChange Out Differential Pressure: 35psid(2.4 bar)

FDA Listed Materials

All Materials Meet U.S. Food and Drug Administered Requirements for Food and Beverage Contact (CFR 177.1500)

Toxicity

All Cartridge Components Meet USP-XXIII, Class V Criteria

Purity

All Filter Cartridges are Free of Surfactants, Anti-static agents, Binders and Adhesives

Ordering Information

PAT

5-

20

P-

3

E

Product Name

Retention Rating

Cartridge Length

Core Material

End
     Configurations

O-ring Materials

POLY-
ADCT

0.5, 1, 3, 5, 10, 20, 30, 50, 75µm

4", 9.87", 10", 19.5", 20", 29.5", 30", 39.5", 40", 50"

P = PP

DOE = No Symbol  
3 = SOE with 222 O-rings, Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End
PE = PE Gaskets

N = Buna-N
E = EPDM
V = Viton
S = Silicone

Micro-Flow Series Filter Cartridges

High Flow Asymmetric Polyethersulfone Membrane Cartridges for Critical Applications

·Patented Highly Asymmetric PES Membrane

·100% Pre-flushed and Integrity Tested

·Retention Ratings from 0.04 to 1.2µm

·Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

·High Purity Polypropylene Outer Cage Enhances Structural Strength of Filter Cartridges

·Fast Rinse-Up to 18 Megohm-cm

·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

·Manufactured Under a Certified ISO 9001 Quality System

·Manufactured in a Class 1,000 Clean Room

Product Specifications

Materials of Construction:

·Filter Media: Highly Asymmetric Polyethersulfone Membrane

·Hardware: Polypropylene

·Sealing: Thermal Bond

·Support Material: Polypropylene

·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 2.67" (68mm)

·Lengths: 4" (102mm), 9.75" (248mm), 10"(254mm), 19.5" (495mm), 20"(508mm), 29.25"

                (743mm), 30" (762mm), 39" (991mm), 40" (1016mm)

Performance Specifications

·Retention Ratings: 0.04, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2µm

Operating Conditions:

·Maximum Operating Pressure: 75psid (5.1 bar) @ 68°F(20°C)

                                  40 psid (2.8bar) @ 150°F (65°C)

·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

FDA Listed Materials:

Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations

Sanitizing Agents:

Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information

Rinse-Up:

Cartridges will Rinse-Up to 18 Megohm-cm with a Minimum of Throughput

Sterilization:

Multiple Autoclaving for 30 Minutes at 250°F (121°C) under No End Load Conditions. In-Line Steam Sterilization is Not Recommended. May be In-Line Sanitized With Hot Water at 180°F (82°C) for 1 Hour

Ordering Information

MFN

0.2-

10-

3

E

Product
     Name

Retention Rating

Cartridge
     Length

End Configurations

Materials of      O-rings/Gaskets

Micro-Flow

0.04, 0.10.2, 0.45,0.65, 0.81.2µmabs.

4",10",20",
30",40"

DOE = No Symbol  
3 = SOE with 222 O-rings,
Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End

E=EPDM
V=Viton
S=Silicone
F=Teflon Encapsulated Viton

Tech-Flow Series Filter Cartridges

ePTFE Membrane Cartridges forAggressive Liquid and Gas Filtration

·Biologically InertandChemically Resistant PTFE Media

·Absolute Construction with Retention Ratings of 0.05, 0.1, 0.2, 0.45, or 1.0µm

·Uniform Pore Size Throughout Membrane for High Contaminant Retention Capacity and Flow Rate

·Each Filter Element Stamped with Pore Size, Lot and Serial Number for Identification and Traceability

·High Purity Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

·100% Flushed with 18 Megaohm- cm DI Water and Integrity Tested

·Filters are Manufactured, Flushed, Tested and Packaged in a Class 1,000 Clean Room Environment

·Manufactured Under a Certified ISO 9001 Quality System

Product Specifications

Materials of Construction:

·Filter Media: Expanded Polytetrafluoro-ethylene (ePTFE) Membrane

·Hardware:  Standard: Polypropylene

Optional: High Density Polyethylene

·Sealing: Thermal Bond

·Support Material: Polypropylene

·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 2.67" (68mm)

·Lengths: 4" (102mm), 9.75" (248mm), 10"(254mm), 19.5" (495mm), 20"(508mm), 29.25" (743mm),

                   30" (762mm), 39" (991mm), 40" (1016mm)

Performance Specifications

·Retention Ratings: 0.05, 0.1, 0.2, 0.45, 1.0µm

Operating Conditions:

·Maximum Operating Pressure: 80 psid (5.5 bar) @ 68°F (20°C)

                                     20 psid (1.4 bar) @ 203°F (95°C)

·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

FDA Listed Materials:

Manufactured from MaterialsWhich are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations

Sanitizing Agents:

Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information

Ordering Information

TEF

0.2-

10-

P

3

E

Product
     Name

Retention Rating

Cartridge
     Length

Material of Center Core

End Configurations

Materials of      O-rings/Gaskets

Tech-Flow

0.05, 0.1, 0.2, 0.45, 1µmabs.

4",10",20",
30",40"

P = Polypropylene
PE = High Density Polyethylene

DOE = No Symbol
3 = SOE with 222 O-rings,
Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End

E=EPDM      
V=Viton
S=Silicone           F=Teflon Encapsulated  
Viton

UPW-Flow Series Filter Cartridges

Highly Asymmetric Membrane Cartridges for High Purity Water Applications

·Proprietary Highly Asymmetric Polyethersulfone Membrane Delivers a Combination of High Flow Rates and High DirtHolding Capacity

·Absolute Rated at >99.9% Efficiency with Retention

·Retention Ratings from 0.04to 1.2µm

·Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

·Fast Rinse-Up to 18 Megohm-cm

·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

·Manufactured Under a Certified ISO 9001 Quality System

·Manufactured in a Class 1000 Clean Room

Product Specifications

Materials of Construction:

·Filter Media: Highly Asymmetric Polyethersulfone Membrane

·Hardware:  Polypropylene

·Sealing:  Thermal Bond

·Support Material:  Polypropylene

·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 2.67" (68mm)

·Lengths: 4" (102mm), 9.75" (248mm), 10"(254mm), 19.5" (495mm), 20"(508mm), 29.25" (743mm),

                    30" (762mm), 39" (991mm), 40" (1016mm)

Performance Specifications

·Retention Ratings: 0.04, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2µm

Operation Conditions:

·Maximum Differential Pressure: 75psid (5.1bar) @ 68°F(20°C)

                                       40psid (2.8bar) @150°F(65°C)

·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

FDA Listed Materials:

Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations

Sanitizing Agents:

Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information

Rinse-Up:

Cartridges will Rinse-Up to 18 Megohm-cm with a Minimum of Throughput

Pre-Rinsing:

A Pre-Rinse is Available upon Request

Ordering Information

UPW

0.2

10-

3

E

Product
      Name

Retention Rating

Cartridge
      Length

End Configurations

Materials of      O-rings/Gaskets

UPW-Flow

0.04, 0.1,0.2, 0.45,0.65, 0.81.2µmabs.

4",10",20", 30",40"

DOE = No Symbol
3 = SOE with 222 O-rings,
Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End

E=EPDM;
V=Viton  
S=Silicone
F=Teflon Encapsulated Viton

Pleated

Extra-Flow Series Filter Cartridges

Absolute Rated Depth Pleated Cartridges, Excellent for Gel Removal

·Combining the Advantages of Depth Cartridge and Traditional Pleated Cartridge

·Innovative Fusion of Depth and Pleated Technologies Delivers Superior Performance when Removing Gels

·Proprietary Gel Capturing Filter Media - Geltrap

·High Surface Area for Long Service Life

·Micro Denier Melt Blown Fibers for High Efficiency Filtration

·Absolute Rated at >99.9% Efficiency with Retention

·High Flow Rates with Low Pressure Drops

·All Polypropylene Construction

·Manufactured in a Clean Room Environment - Class 10,000

·Manufactured Under a Certified ISO 9001 Quality System      

Product Specifications

Materials of Construction:  

Filter Media: Polypropylene MeltBlown

·Hardware:  Polypropylene

·Cage/Netting: Polypropylene

·Support Material: Polypropylene

·Sealing:  Thermal Bond

·Gaskets/O-rings:  Silicone , Buna N, EPDM, Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter:  2.67" (68mm)

·Lengths: 4" (102mm), 9.75" (248mm),

                     10" (254mm), 19.5" (495mm),

                     20" (508mm), 29.25" (743mm),

                     30" (762mm), 39" (991mm),

                     40" (1016mm)

Surface Area:      

Up to 2.5 ft2 (0.23 m2) of EffectiveFiltration Area per 10" (254mm) EquivalentDepend on Micro Rating

Performance Specifications

Retention Ratings:  1, 3, 5, 10, 20, 30, 40µmAbsolute

Operating Conditions:

·Maximum OperatingPressure: 70 psid (4.8 bar) @ 120°F (49°C)

                   40 psid(2.8 bar) @ 150°F (65°C)

·Recommended Change Out Differential Pressure: 35 psid (2.4 bard)

FDA Listed Materials:

Manufactured from Materials Which are FDA Listed for FoodContact Applications in Title 21 of the U.S. Code of FederalRegulations

Toxicity

All Components meet the Specifications for Biological Safetyas per the USP for Class VI-121°C Plastics (Gaskets/O-ringsExcluded)

Purity:

Cartridges are Free of Surfactants, Resins, Binders andAdhesives

Sterilization:

Multiple Autoclaving for 30 Minutes at 250°F (121°C) underno End Load Conditions. In-line Steam Sterilization is not

Recommended. May be In-line Sanitized with Hot Water at180°F(82°C) for 1 Hour

Ordering Information

EXA

5-

10-

3

E

Product
     Name

Retention
     Rating

Cartridge
     Length

End Configurations

Materials of      O-rings/Gaskets

Extra-
Flow

1,3,5,10,20,30,

40µm abs.

4”,10”,20”,
30”,40”

DOE = No Symbol  
3 = SOE with 222 O-rings,
Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End

E=EPDM      
V=Viton  
S=Silicone        
F=Teflon Encapsulated Viton

FasClean-Flow Series High Flow Filter Cartridges

Extra Large Filtration Surface Area Filter Cartridge, Suitable for TFT-LCD and High Purity Water Applications

·Ideally Suited for Most LCD and TFT Wet Processing Applications and  the Filtration of High Purity Water

·Suitable for Generation 7 and 8 TFT-LCD Glass Cleaning and High End Process Filtration Applications

·Wide Range of Filter Media and Retention Ratings Available,Enabling Optimization of Critical Processes

·High Purity Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

·Compact Design Permits Efficient Filter Change-OutsReducing Equipment Down-Time and Maintenance Costs

·Each Filter Element Stamped with Pore Size, Lot and Serial Number for Identification and Traceability

·High Purity Polypropylene Outer Cage and Center Core Enhances Mechanical Strength of the Filter Cartridges

·100% Flushed with 18 Megohm-cmDI Waterand Integrity Tested.

·Filters are Manufactured, Flushed, Tested and Packaged in a Class 1,000 CleanRoom Environment

·ManufacturedUnder a Certified ISO 9001 Quality System

Product Specifications

Materials of Construction:

·Filter Media: E:   Depth Melt Blown Polypropylene

                       P:   High Flow Melt Blown Polypropylene

                       S:   Highly Asymmetric PES Membrane

                       T:  Expanded Polytetrafluoro-ethylene (ePTFE) Membrane

·Hardware: High Purity Polypropylene

·Sealing:  Thermal Bond

·Support Material: Polypropylene

·Gaskets/O-rings:  EPDM, Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 5.16”(131mm)

·Lengths: 10" (254mm)

Performance Specifications

Retention Ratings:  E:  1, 3, 4.5, 10, 20µmAbsolute

                           P:   0.45, 1, 4.5, 10, 20µm

                           S:   0.1, 0.2, 0.45, 0.8, 1.2, 5µmAbsolute

                           T:    0.1, 0.2, 0.45, 1, 3, 10µmAbsolute

Operating Conditions:

·Maximum Operating Temperature: 168°F(75°C)

·Recommended Change Out Differential Pressure: 35psid (2.4bar)

Ordering Information

FCF

P-

5-

10-

334

E

Product Name

Materials

Retention Rating

Cartridge Length

End Configurations

Materials of O-rings

FasClean-Flow

E = Depth
PP P = High Flow PP
S = PES T = PTFE

1 ~ 20µmabs.
0.45 ~ 20µmabs
0.1 ~ 5µmabs.
0.1 ~ 10µmabs.

10"

334 = SOE Flat End

E = EPDM
V = Viton
F = Teflon
Encapsulated Viton

Mega-Flow Series High Flow Filter Cartridges

High Surface Area Filter Cartridge, Suitable for Applications in the TFT-LCD Industry

·Ideally Suited for Most LCD and TFT Wet Processing Applications and the Filtration of High Purity Water

·Wide Range of Filter Media and Removal Ratings Available Enabling Optimization of Many Processes

·High Purity Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

·Compact Cartridge Design Offers Long On-Stream Life Reducing Equipment Down-Time and Maintenance Costs

·Each Filter Element Stamped with Pore Size, Lot and Serial Number for Identification and Traceability

·100% Flushed with 18 Megaohm-cm DI Water for PES and PTFE Media

·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

·Filters are Manufactured, Flushed, Tested and Packaged in a Class 1,000 CleanRoom Environment

·Manufactured Under a Certified ISO 9001 Quality System

Product Specifications

Materials of Construction:

·Filter Media:   MEP: High Flow MeltBlown Polypropylene

                         MES:  Highly Asymmetric PES Membrane

                         MEF Expanded Polytetrafluoro-ethylene (ePTFE) Membrane

·Hardware: High Purity Polypropylene

·Sealing: Thermal Bond

·Support Material: Polypropylene

·Gaskets/O-rings: Silicone, EPDM, Burn-N,Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 3.2”(83mm)

·Lengths: 10" (254mm)

Performance Specifications

·Retention Ratings:  MEP: 0.25, 0.45, 0.8, 2, 5, 10µm

                              MES:  0.1, 0.2, 0.45µm

                              MEF 0.1, 0.2, 0.45µm

Operating Conditions:

·Maximum Operating Temperature: 168 °F(75°C)

·Recommended Change Out Differential Pressure: 35psid (2.4bar)

Ordering Information

MEP

5-

10-

6

E

Product
     Name

Retention Rating

Cartridge
     Length

End Configurations

Materials of      O-rings/Gaskets

Mega-Flow
MEP (PP) MES (PES)
MEF (PTFE)

0.25~10µm0.1~0.45µmabs.
0.1~0.45µmabs.

10”, 20”

3 = SOE with 222 O-rings,
Flat Closed End
6 = SOE with 226 O-rings,
Flat Closed End

E = EPDM
V = Viton  
F = Teflon
Encapsulated Viton

Multipleat High Flow Series Filter Cartridges

High Flow Pleated Cartridges Incorporating Proprietary Melt Blown Filter Media

·Very High Surface Area per Cartridge - High Flow Rates, Long Service Life and Reduced Maintenance Costs

·Insideto Outside Flow Configuration-All Contaminants Held Within the Single Open Ended Filter

·Available in 20", 40" and 60" Lengths

·Proprietary Filter Media Produced for Filtrafine Delivers Highly Consistent Performance

·Fixed Pore Construction – Resists Dirt Unloading at High Differential Pressures

·Polypropylene Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

·Manufactured in a Class 1,000 Clean Room

·Manufactured Under a Certified ISO 9001 Quality System

Product Specifications

Materials of Construction:

·Filter Media: MeltBlown Polypropylene

·Hardware:  Polypropylene

·Sealing:  Thermal Bond

·Support Material: Polypropylene

·O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 6" (152mm)

·Lengths: 20” (508mm), 40” (1016mm), 60”(1524mm)

Performance Specifications

·Retention Ratings: 1, 3, 4.5, 10, 20, 40μm Absolute

Operating Conditions:

·Maximum Operating Temperature: 140°F(60°C)

·Recommended Change Out Differential Pressure: 30psid (2.1bar)

FDA Listed Materials:

Manufactured from Materials Which are FDA Listed for FoodContact Applications in Title 21 of the U.S. Code of FederalRegulations

Toxicity:

All Polypropylene Components meet the Specifications forBiological Safety as per the USP for Class VI-121°C Plastics(Gaskets/O-rings Excluded)

Typical Applications

·Food and Beverage

·Seawater Desalination

·Cooling Water

·Industrial Water

·RO Pre-filtration

·Amine Circulation Filtration

·Process Water and Waste Water Treatment

Retention Rating / Liquid Flow Rate vs. Initial Pressure Drop

Retention Rating (Absolute) µm

Initial Pressure Drop 20”/508mm Length (psid/gpm)/(x100)bar/lpm

Initial Pressure Drop 40”/1016mm Length (psid/gpm)/(x100)bar/lpm

Initial Pressure Drop 60”/1524mm Length (psid/gpm)/(x100)bar/lpm

1

0.0090 / 0.0164

0.0049 / 0.0089

0.0040 / 0.0073

3

0.0070 / 0.0127

0.0035 / 0.0064

0.0027 / 0.0049

4.5

0.0042 / 0.0076

0.0022 / 0.0040

0.0017 / 0.0031

10

0.0035 / 0.0064

0.0019 / 0.0035

0.0010 / 0.0018

20

0.0025 / 0.0046

0.0013 / 0.0024

0.0009 / 0.0016

40

0.0010 / 0.0018

0.0007 / 0.0013

0.0005 / 0.0009

Recommended Maximum Flow Rate per Cartridge To Optimize System Performance

Length of Cartridge

Recommended Operation Flow Rate (gpm) / (m3/hr)

20”

110 / 25

40”

220 / 50

60”

308 / 70


Ordering Information

MHF

010-

620-

E

Product   Name

Absolute Micron Rating (µm)

Cartridge  Length

Materials of O-rings

Multipleat High Flow

010 = 1
030 = 3
045 = 4.5
100 = 10
200 = 20
400 = 40

20
40
60

E = EPDM
V = Viton
S= Silicone
F = Teflon Encapsulated Vito

Pleated-Flow Series Filter Cartridges

High Performance Pleated Polypropylene Melt Blown Cartridges Deliver Consistent Performance and Long On-Stream Life

·Proprietary Filter Media Produced for Filtrafine Delivers Highly Consistent Performance

·Fixed Pore Construction – Resists Dirt Unloading at Maximum Differential Pressure

·Polypropylene Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

·High Surface Area – High Flow Rates and Long Service Life Reduced Maintenance Costs

·Rigid Polypropylene Core Enhances Structural Strength of Filter Cartridges

·Fast Rinse-Up to 18 Megohm-cm

·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

·Manufactured in a Class 10,000 Clean Room

·Manufactured Under a Certified ISO 9001 Quality System

Product Specifications

Materials of Construction:

·Filter Media:  Polypropylene

·Hardware:  Polypropylene

·Sealing:  Thermal Bond

·Support Material:  Polypropylene

·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 2.67" (68mm)

·Lengths: 4" (102mm), 9.75" (248mm),

                  10"(254mm), 19.5" (495mm),

                  20"(508mm), 29.25" (743mm),

                  30" (762mm), 39" (991mm),

                  40" (1016mm)

Performance Specifications

·Retention Ratings: 0.2, 0.25 0.45, 0.8, 2, 3, 5, 10, 30µm

Operating Conditions:

·Maximum OperatingPressure: 75 psid (5.1 bar) @ 68°F (20°C)

                                40 psid (2.8bar) @ 150°F(65°C)

·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

FDA Listed Materials:

Manufactured from Materials Which are FDA Listed for FoodContact Applications in Title 21 of the U.S. Code of FederalRegulations

Toxicity:

All Polypropylene Components meet the Specifications forBiological Safety as per the USP for Class VI-121°C Plastics(Gaskets/O-rings Excluded)

Purity:

Cartridges are Free of Surfactants, Resins, Binders and Adhesives

Sterilization:

Multiple Autoclaving for 30 Minutes at 250°F (121°C) underNo End Load Conditions. In-Line Steam Sterilization is NotRecommended. May be In-Line Sanitized with Hot Water at180°F(82°C) for 1 Hour.

Ordering Information

PLT

5-

10-

3

E

Product
      Name

Retention Rating

Cartridge
      Length

End Configurations

Materials of      O-rings/Gaskets

Pleated-
Flow

0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30µm

4",10",20",
30",40"

DOE = No Symbol  
3 = SOE with 222 O-rings,
Flat Closed End
8 = SOE with 222 O-rings,
Fin End
7 = SOE with 226 O-rings,
Fin End

E=EPDM      

V=Viton  
S=Silicone    
F=Teflon Encapsulated Viton


Stainless

Metal-Flow Series Filter Cartridges

Suitable for High Temperature, High Pressure, and Corrosive Applications; Cartridges can be Regenerated in Many Processes

·Available with Sintered Stainless Steel Fiber or Sintered Fiber Mesh Filter Media

·304 or 316 Stainless Steel Filter Cartridge is Cleanable in a Variety of Applications

·High Surface Area Pleated Configuration for Additional On-stream Life

·Robust, AllWelded Construction

·Single Open End Configurations Available for Greater Sealing Integrity

·Retention Ratings from 1 to 100µm

·Lengths from 10” to 40” (254mm~1016mm)

·Available in Configurations to Fit Existing Filter Housings. Custom Cartridge Designs are Also Available

·Manufactured Undera Certified ISO 9001 Quality System

Product Specifications

Materials of Construction:

·Filter Media: 304or 316Sintered Stainless Steel Fiber or Sintered Wire Mesh

·Support Media: Stainless Steel Sintered Mesh

·Hardware:  304or 316Stainless Steel

·End Caps: 304or 316Stainless Steel

·Sealing:  Tig Welded

·Gaskets/O-rings: Silicone, EPDM,Viton, Teflon Encapsulated Viton

Dimensions (nominal):

·Outside Diameter: 2.7” (68mm)

·Lengths: 10" to 40” (254mm~1016mm)

Performance Specifications

·Retention Ratings: 1, 5, 10, 25, 50, 75, 100µm

Operating Conditions:

·Maximum Forward Differential Pressure: 145 psid (10 bar)

·Maximum Reverse Differential Pressure: 29 psid (2 bar)

·Maximum Continuous Operating Temperature:  392 °F(200°C) Please Check Gasket Temperature Compatibility

Ordering Information

SSP

5-

10-

S-

3

E

Product Name

Retention Rating

Cartridge Length

Material

End Configurations

Materials of O-rings

Metal-Flo
SSD = Depth Type
SSP = Pleated Type

1, 5, 10, 25, 50, 75, 100µm

10", 20”, 30”,40”

A = 304 SS
S = 316 SS

DOE = No
Symbol 3 = SOE with 222 O-rings,
Flat Closed End

E = EPDM
V = Viton
S = Silicone
F = Teflon Encapsulated Viton


Winding

Wound-Fine BB Series Filter Cartridges

Multi-Purpose Depth Filter Cartridges that Deliver Reliable, Consistent Performance for Use in Big Blue Housings

·Graded Pore Structure for Efficient Removal of a Wide Range of Particle Sizes

·Cartridges Manufactured byComputerized and State-of-the-Art Equipment to Ensure Consistent Quality

·Optional Inner Core Cover to Minimize Fiber Migration

·Available in Cotton and Polypropylene Media

·Wide Chemical Compatibility

·Cartridge Lengths from 10” to 20”

·Special Outside Diameter of 4.3”

·Manufactured Under an ISO 9001 Quality System

Product Specifications

Materials of Construction:

·Filter Media: Premium Bleached Cotton (FDA Listed)

                        Cleaned Polypropylene (FDA Listed)

·Center Core:  Polypropylene

                      304 Stainless Steel

Dimensions

·Length:  10" to 20" (254mm to 508mm)

·Inner Diameter: 1.1” (28mm)   

·Outer Diameter: 4.3” (110mm)

Performance Specifications

·Retention Ratings: 1, 3, 5, 10 and 20µm

·Maximum Temperature: See Material Selection Guide

Material Selection Guide

 

Filter Medium

Premium
     Bleached Cotton  (FDA Listed)


       
     Cleaned
     Polypropylene
     (FDA Listed)


Max.
Temp.

Stainless Steel Core

300°F
130°C

200°F
95°C

Polypropylene Core

140°F
60°C

140°F
 60°C


Food, Potable Water

Excellent

Excellent

Compatibility

Oils

Excellent

Excellent

Organic Acids

Good

Excellent

Alkalis

Good

Excellent

Ordering Information

WF-

5-

P

10

P-

BB

Product Name

Retention Rating

Filter Media

Cartridge  Length

Core  Material

End Configuration    

Wound-
     FineBB

1,3,5,10 ,20µm

P=Cleaned PP  
     C=PremiumBleached Cotton

10”,20”

P=PP
     A=304 SS

BB=For Big Blue Size

Wound-Fine Series Filter Cartridges

Multi-Purpose Depth Filter Cartridges that Deliver Reliable, Consistent Performance Over Time

·Graded Pore Structure for Efficient Removal of Wide Range of Particle Sizes

·Available in Cotton, Polypropylene and Glass Fiber Media Ensuring Wide Chemical Compatibility

·Cartridges Manufactured byComputerized and State-of-the-Art Equipment to Ensure Consistent Quality

·WideRangeof Micron

·Proprietary Helical Center Core Provides Added Mechanical Strength in Demanding Applications

·Use of Optional Inner Core Cover to Minimize Fiber Migration

·Single Open End Cartridge Configurations Available

·Wide Chemical Compatibility

·Cartridge Lengths From 9.75” to 70”

·Extended Core Available

·Manufactured Under a Certified ISO 9001 Quality System

Product Specifications

Material of Construction:

·Filter Media: Premium Bleached Cotton(FDA Listed)

                     Cleaned Polypropylene(FDA Listed)

                     Glass Fiber

·Center Core: Polypropylene

                      304 Stainless Steel

                      316 Stainless Steel

·Extended Core Option:  Polypropylene

                                  304 Stainless Steel

                                  316 Stainless Steel

·Core Cover Option: Used to Control Fiber Migration. Compatible with Existing Fiber

Dimensions:

·Length: 9.75"to70" (248mm to1778mm)

·Inner Diameter:  1.1”(28mm)

·Outer Diameter: 2.5” (63mm)

Performance Specifications

·Retention Ratings:  0.5, 1, 2, 3, 5, 7, 10, 15, 20, 25, 30, 40, 50, 75, 100, 150, 200µm

Operating Conditions:

·Maximum Temperature Ratings: See Material Selection Guide

Material Selection Guide



Filter Medium

Premium Bleached Cotton  (FDA Listed)

Cleaned
Polypropylene
(FDA Listed)

Glass Fiber

Max. Temp.

Stainless Steel Core

300°F 

    130°C

200°F
95°C

750°F
 400°C

Polypropylene Core

140°F
60°C

140°

       60°C

140°

     60°C

Compatibility

Food, Potable Water

Excellent

Excellent

Poor

Organic Solvents

Excellent

Good

Excellent

Oils

Excellent

Excellent

Excellent

Organic Acids

Good

Excellent

Excellent

Alkalis

Good

Excellent

Poor

Oxidizing Agents

Fair

Good

Excellent

Steam, Non Continuous

N/R

Fair

N/R

Strong Acids

N/R

Excellent

Excellent

Dilute Acids

Fair

Excellent

Excellent

Micro Organism Resistance

Poor

Excellent

Excellent


Ordering Information

WF-

5-

P

10

P-

EP

Product Name

Retention Rating

Filter Media

Cartridge  Length

Core  Material

ExtendCore

Wound-
     Fine

0.5,1,3,5,10,20,

25,30,

50,75,100, 150, 200µm

P=Cleaned PP  
C=Premium 

Bleached Cotton  
G=Glass Fiber

9.75",10",19.5",20",

29.5",30",
39.5",40",
50”(SS core), 60” (SS core), 70” (SS core)

P=PP  
A=304 SS   S=316 SS

EP=Polypropylene EA=304 SS  
ES=316 SS  
3=SOE with 222 O-rings,
Flat Closed End
8=SOE with 222 O-rings,
Fin End
C=Core cover

European service Office:

Contact: peter dellhage

Tel:+46 31 7145664

Mobile: +46 768 672470

Skype: pdellhage

Mail:peter@zhenxingfiltech.com

MESH and metal filter parts FACOTRY :

TIAN TAI ZhenXing wire mesh factory 

ADD: pingqiao industry zone, tiantai, zhejiang, China

CN 317203

Hunter GeXiongfei

Tel: +86-18958507619

Fax:+86-576-83661619

Email: wiremesh@ttwire-mesh.com

           Hunter@zhenxingfiltech.com

FELT AND BAG FACTORY:

ADD: pingqiao industry zone, tiantai, zhejiang, China

CN 317203

CONTACT:Totti

Tel: +86 13989313130

Fax:+86 0576 83661619

Email: totti@zhenxingfiltech.com

Hot Tags: polywound string wound filter cartridges, China, suppliers, manufacturers, factory
Related Products
Inquiry