TIANTAI ZHENXING FILTECH FACTORY

High quality product, professional service, being the core supplier in laser industry!

Home > News > Content
The Filter Bag Has A Long Service Life
- Jun 12, 2017 -


Liquid sometimes a small amount of oil, then you need to remove the oil in the liquid, the filter bag is to remove the liquid in the trace oil and design. The tiny fibers in the filter layer can capture the oil molecules with large tension, while being able to intercept small particles in the liquid.

Melt-blown polypropylene oil-absorbent cotton has excellent hydrophobic lipophilicity, Filter Bags fast oil absorption, large oil absorption. Acid and alkali, organic solvents, good resistance to folding strength. A small amount of non-emulsified hydrocarbons in the liquid are removed. This filter can not only remove oil, but also in accordance with the required different levels of particles removed.

In addition to oil can remove oil in the liquid, but also can remove impurities in the liquid at the same time to achieve the dual effect of oil absorption and removal function, Filter Bags according to the size of different particles of customers, the production of different impurities for the oil bag.

The main advantages of the filter bag

1. High efficiency oil absorption capacity.

2. All use of FDA-compliant sanitary grades of fibrous filter material, Filter Bags excluding silicon contamination

3. Multi-layer composite deep filter structure

Double utility. Oil absorption and interception of impurities

5. Extensive filter material for chemical compatibility

6. Filter material surface by professional anti-fiber free treatment

7. Large amount of slag, long service life

The filter bag is suitable for the painting line, the pretreatment of the waste water, the production line of the circuit board, the production line of the automobile, the metal casting, Filter Bags the filter protection before the ultrafiltration, and the oil removal of the spray water.

Filter bag in the installation to pay attention to matters:

1, come up with a new filter bag, the new filter bag sealed cartons, unused filter bag must be re-loaded into the plastic bag to prevent dust pollution.

2, turn off the power to stop the pump, close the inlet and outlet valves (for those who have been using the filter bag).

3, release the pressure, for safety reasons, to ensure that the nozzle is rushed to a safe place. Open the exhaust valve to slowly lower the filter pressure (for the user who has already used the filter bag).

4, open the lid, to ensure that the cartridge pressure drop to zero after opening the lid. Take out the used filter bag. (For users who have already used the filter bag).

5, to ensure that the filter edges are cleaned up.

6, check the basket of arc and edge. The upper edge of the basket and the contact surface of the filter cartridge must be flat. If there is no basket or basket installation error will lead to filter failure.

7, the installation of new filter bags, filter bags must be inserted into the basket, Filter Bags the filter bag seal must be properly seated in the sealed slot.

8, check the gasket, select the fluid compatible with the gasket. Close the cover, and note that when the filter cover is closed, make sure that the washer does not twist or leave the slot and tighten the ring nuts clockwise.

9, close the exhaust valve, open the pump switch. Open the inlet valve and slowly open the valve to see if it leaks. When a leak occurs, immediately close the inlet valve, from the start, open the outlet valve.

This is best done by a professional or under the guidance of a professional.